Home
Home Donations Cats
Authors History
Documentation
Documentation Man pages
FAQ Developer Info
Developer Inf
Developer Info Module Interface Creating RPM Packages
CVS Information Web site
 
 Official FVWM Home Page plain theme

FVWM - CVS Information


FVWM development uses a CVS server.

Note: the state of code in the CVS repository fluctuates wildly. It will contain bugs, maybe ones that crash the program. It may not even compile for you. Consider it alpha-quality code. You have been warned.

Contents

Before You Begin [top]

To know what is going in with the source tree you should be reading mail on the Fvwm Workers List. See the Mailing List Info page for more information.

To build FVWM from the CVS sources, you must have several GNU tools:

Without these tools, you won't be able to build out of the CVS source tree. But don't despair: download one of the daily snapshots instead!

Initial Setup [top]

To make life easier on yourself, create the file `~/.cvsrc', and insert the following lines. These set useful default options for the three most used CVS commands. Do this now before going any further.

diff -u
checkout -P
update -d -P
cvs -q

The last line makes cvs operations quieter, but you still get full error messages.

Also, if you are on a slow net link (like a dialup), you'll also want a line containing `cvs -z3' in this file. This turns on a useful compression level for all cvs commands. Setting it higher will only waste your CPU time.

Before you can download development source code for the first time, you must login to the server:

cvs -d :pserver:anonymous@cvs.fvwm.org:/home/cvs/fvwm login

The password is `guest'. The command outputs nothing if it works, and an error message if it failed. You only need to log in once; all subsequent CVS commands read the password stored in the file `~/.cvspass'.

Checking Out Source Code [top]

Next, you checkout the source code. First you must decide what version you're interested in. The structure of the CVS tree is as follows:

Given these rules, you should be able to translate the version of you want to retrieve to a label for use with the checkout command below (or other CVS commands which might need them).

You use the CVS checkout (or co) command to retrieve an initial copy of the code. The simplest form of this command, for retrieving the latest code, doesn't require any label:

cvs -d :pserver:anonymous@cvs.fvwm.org:/home/cvs/fvwm checkout -r branch-2_6 fvwm

If you want to see a particular version of the sources you can use a version label instead of a branch label on the checkout command:

cvs -d :pserver:anonymous@cvs.fvwm.org:/home/cvs/fvwm co -r version-2_1_10 -d fvwm-2.1.10 fvwm

Please note that if you check out a specific version, the update command will be useless in that copy: after all, the code for that version hasn't changed so there's nothing to update...

The version and branch labels "stick" to your copy of the tree, so that if you check out a branch, all update commands will be handled with respect to that branch. These are called "sticky tags"; please see the CVS documentation for more details on these and how they work, or how to "un-stick" a checked out version if you need to.

Note that when you are inside the working directory, you no longer need the "-d :pserver:..." argument when issuing CVS commands.

CVS commands work from anywhere inside the source tree, and recurse downwards. So if you happen to issue an update from inside the `docs' subdirectory it will work fine, but only update the docs. In all of the following command examples, we assume that you have cd'd to the top of the source tree.

Building the Tree [top]

So, you now have a copy of the code. Get in there and get to work!

The first thing you need to do is create a configure script. The configure script will also need the Makefile.in files in order to generate the Makefiles. The autoconf and automake tools do this for you (you did remember to install autoconf and automake, right?)

So, when you have a newly checked-out source tree the first thing to do is:

cd fvwm
aclocal
autoheader
automake --add-missing
autoreconf

The last command is autoreconf, not autoconf. You will get some warning messages from autoreconf and possibly from automake. As long as you end up with a working configure script, you should ignore them.

To automate this step we include a shell script

utils/configure_dev.sh

in the cvs tree, it may be run with usual ./configure arguments instead of all auto commands above.

Once that's done, you can proceed to build the code as discussed in the INSTALL.fvwm and INSTALL files:

./configure
make
make install

with appropriate options and arguments, as you like.

Code Updates [top]

From time to time, the dedicated FVWM Workers will make changes to the CVS repository. Announcements of this are automatically sent to the fvwm-workers list. You will want to be subscribed to this list!

You can update your copy of the sources to match the master repository with the update command. Note it's not necessary to check out a new copy! Using update is significantly faster and simpler, as it will download only patches instead of entire files, only update files that have changed since your last update, and it will automatically merge any changes in the CVS repository with any local changes you may have made.

cvs update

If you didn't use a tag when you checked out, this will update your sources to the latest version on the main branch. If you used a branch tag, it will update to the latest version on that branch. If you used a version tag, it won't do anything (see above).

After updating the local source directory, it is usually enough to issue make to rebuild everything. It is safe to manually run aclocal, automake and autoconf if you think something should be rebuilt, but this sould be run automatically on make.

Starting a Project [top]

Discuss your ideas on the workers list before you start. Someone may be working on the same thing you have in mind. Or they may have good ideas about how to go about it.

If you just have a small patch you want to make, you may just commit it to the main branch. If the change is large, and lots of other work is going on, you may want to do your changes on a "side branch" which will get merged into the main branch later on. Before creating a branch, you discuss the matter with the other workers. If you are new to CVS, you should read the CVS documentation several times, and ask for help. The documentation is sufficiently large and confusing that it is rather difficult to get right the first few times.

Hacking the Code [top]

So you've found a bug you want to fix? Want to implement a feature from the Jitterbug list? Got a new feature to implement? Hacking the code couldn't be easier. Just edit your copy of the sources. No need to copy files to `.orig' or anything; CVS has copies of the originals.

When you have the code in a working state, generate a patch against the current sources in the CVS repository.

cvs update
cvs diff -u > patchfile

Mail the patch to the fvwm-workers list with a description of what you did. But read the FAQ file about ChangeLog entries before doing so.

Conflicts [top]

If someone else has been working on the same files as you have, you may find that you have made conflicting modifications. You'll discover this when you try to update your sources.

$ cvs update
RCS file: /home/cvs/fvwm/fvwm/fvwm/icons.c,v
retrieving revision 1.5
retrieving revision 1.6
Merging differences between 1.5 and 1.6 into icons.c
rcsmerge: warning: conflicts during merge
cvs server: conflicts found in fvwm/icons.c
C fvwm/icons.c

Don't Panic! Your working file, as it existed before the update, is saved under the filename `.#icons.c.1.5'; hence you can always recover it, should things go horribly wrong. The file named `icons.c' now contains both the old (i.e. your) version and new version of lines that conflicted. You simply edit the file and resolve each conflict by deleting the unwanted version of the lines involved.

<<<<<<< icons.c
XpmImage    my_image = {0};  /* testing */
=======
>>>>>>> 1.6

Don't forget to delete the lines with all the "<", "=", and ">" symbols.

Getting Commit Access [top]

Using the procedures described above, and being on the workers list are a prerequisite to gaining update access. We expect to have heard from you more than once on the fvwm-workers list so that we have some idea who you are.

Doing some testing, submitting some patches, and getting involved in the discussions will help us know about you.

After you have been involved for a while, if we don't suggest it, then ask. The FVWM development team is not a closed environment, we welcome new members. There are no required duties, all work is strictly voluntary.

If there is agreement on the list that you should be given update access, you will need to choose a CVS user ID and provide an encrypted password. The latter can be obtained with the following Perl snippet:

perl -e 'print crypt("yourpass", join("", ((a..z, A..Z, 0..9)[rand(62), rand(62)]))), "\n"'

Change yourpass to whatever you want your password to be. Send the encrypted password to Jason Tibbitts, (tibbs@math.uh.edu). Jason is the list maintainer, and provides our CVS repository.

Once you have update access, re-do the login command above using your CVS user ID in place of anonymous and your password in place of guest, and you are on your way.

Committing Changes [top]

Now that you have write permissions and have logged in with your CVS username, you can commit changes. This is done (surprise!) with the CVS commit command.

Note it's usually a good idea to run a cvs update just before you commit, to make sure you've got the latest code. If you try to commit changes to a file that someone else has changed since you last updated, CVS will complain and not allow the commit. But, changes to other files could indirectly affect your new code, as well. In general if you're doing development it really pays to follow the old(?) adage, "Update early and often".

To commit all the modified files in your workspace, use:

cvs commit

CVS will pop up your favorite editor to allow you to enter comments about what changes you've made. These comments will appear in the email sent to fvwm-workers, so please write something useful.

Also, you will see a complete list of files that CVS thinks you have changed. Please sanity-check this list! Make sure there's nothing you don't expect there, and everything you do expect.

If you don't like the all-or-nothing approach, you can specify only certain files to be committed:

cvs commit fvwm/fvwm.1 modules/FvwmAuto/FvwmAuto.1

Again, please sanity-check the list to be sure you have everything.

Adding Directories and Files [top]

First create the new directories and files locally. Then, assuming the new directory is named `newdir' and the new file is `newmod.c':

    cvs add -m "New directory for ..." newdir
cd newdir
cvs add -m "File newmod.c is a module that ..." newmod.c

When adding new directories and files, please be sure to take a look at the relevant Makefile.am files and modify them as appropriate! See the DEVELOPERS file for more details on this.

Deleting Directories and Files [top]

You don't directly delete directories, you delete all the files in a directory and the directory goes away during an `update -dP'. To delete one or more files:

cvs remove filename...
cvs commit -m 'deleted files because' filename...

Again, when removing directories or files please be sure to update the appropriate Makefile.am files. See DEVELOPERS.

Renaming/Moving Files [top]

There is no perfect way to rename or move files in CVS. There are a few different methods, each with good and bad points. For FVWM, we've chosen the most straightforward method: remove the old file and add a new file. In order to preserve some kind of link, please include a pointer to the old file in the comments of the new file (and vice versa).

Again, when renaming or moving files please be sure to update the appropriate Makefile.am files. See DEVELOPERS.

Creating New Branches [top]

Please contact the fvwm-workers list and discuss any new branch you'd like to create, just so we have an idea about what and why.

When creating a branch it's best to base it off of a previously-existing, labeled checkpoint. Here we'll use the example of creating a new branch for 2.2.x development after the 2.2 release was made. Because of our rules, we know that the new branch name should be branch-2_2, but if you're creating a branch for a new feature you can use any valid label.

Once you know where you want to branch from and what you want to call the new branch, use the cvs rtag command to create the branch (be sure you're in the root of your checkout):

cvs rtag -b -r version-2_2_0 branch-2_2 .

The first thing you'll probably want to do on the new branch is edit the configure.in file to change the version number, so people know it's different. See the DEVELOPERS file for information on this.

Creating New Source Trees [top]

Please contact the fvwm-workers list and discuss any new source trees you'd like to create, just so we have an idea about what and why.

The source code for Fvwm is in the "fvwm" source tree. Source code for the Fvwm web site is in the "fvwm-web" source tree.

If you have update access to "fvwm", you can also update the other source trees and create new source trees.

Working on the fvwm-web Source Tree [top]

Its important to remember anything checked into the fvwm-web branch will automatically appear on the fvwm web pages. Be careful to check your work before you commit a change.

Since Fvwm web pages are PHP based, you need a web server supporting PHP to test your changes before doing a commit. If you can't do that, check the Fvwm web site after commits in a timely manner. (Don't go on vacation before checking.)

Some of the sub-directories in the fvwm-web branch can take a long time to checkout or commit due to their large size. This is especially true over dial-up connections. All of the CVS commands can be convinced to only work on one directory or sub-directory by using the -l argument.

For example, to do an initial checkout of the root:
    cvs -d :pserver:anonymous@cvs.fvwm.org:/home/cvs/fvwm checkout  fvwm-web

Some parts of the fvwm-web tree are generated from fvwm tree source files. The generated files are in the directories:

fvwm-web/authors/
fvwm-web/news/
fvwm-web/documentation/faq/
fvwm-web/documentation/manpages/
fvwm-web/documentation/perllib/

Each directory has a script generating one or more php files. You would normally run these scripts (at least in the first 3 directories) whenever you made a change to fvwm/NEWS, fvwm/docs/FAQ or fvwm/AUTHORS that you want to appear on the fvwm web site. Instructions are in the scripts.

Last modified on April 11, 2014